Silverwater, NSW, 2128
Penrose, Auckland, NZ, 1642
Roadmap
HYDROLINE RO-I
- The raw mains water enters an enclosed system and is forced at high pressure through a special extremely fine membrane
- Salts and minerals are thereby completely removed from the water. The downstream dishwasher is thus supplied by perfectly clean water
- Easy access to membrane and pre-filter
- Operational indications on the display of the glasswasher
- Minimum space requirement: Machine with integrated reverse osmosis has a total height of only 815 mm and fits under the counter
- Provides demineralised water in continuous operation for highest demands on the wash result
- Prevents salt and limescale stains on glasses
- No need for manual polishing of glasses and cutlery
- Protects machine against limescale deposits
- Optimises the effectiveness of detergents
- Minimum operating costs at highest capacity
- Direct communication with the dishwasher
- Fast and easy removal of the pre-filter
Technical data
| Weight (gross / net) | 20 kg |
| Maximum Supply Hardness | 35 °dH |
| Maximum Conductivity Supply Water | 1,200 µS/cm |
| Supply Capacity Continuous | 2 l/min |
* The installation must be performed according to WMTS-101:2018. A back flow prevention for the raw water supply must be installed. A back flow prevention for the drain connetion is part of the optional installation kit. From 10° dH ,we recommend installing an upstream water softening system to prevent the blockage of the membrane. Hard water reduces the permeate output and shortens the life of the membrane.
Accessories
| Order number | Description |
|---|---|
| 01-294225-101 |
ROI & ROS Replacement carbon pre-filter cartridge |
| 01-294217-1 |
25 litre buff er tank to increase the capacity and to achieve a more even level of purification |
For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a HOBART HYDROLINE water softener / treatment system.