Contact us
AUSTRALIA HEAD OFFICE
Unit 1 of No 2 Picken Street
Silverwater, NSW, 2128
1800 462 278
NEW ZEALAND HEAD OFFICE
35 Station Street
Penrose, Auckland, NZ, 1642
0800 462 278
Roadmap
Contact
Product comparison
Compare products now


Comparison list
HOBART
Water Treatment

HYDROLINE RO-L28

HYDROLINE RO-L28

For the highest capacity of Reverse Osmosis water: The powerful reverse osmosis system HYDROLINE PURE RO-L28 provides demineralised water for top-quality wash results. No need for manual polishing of glasses and cutlery in your Rack Conveyors and Flight Type Dishwashers.

DESCRIPTION

DOWNLOAD SPEC SHEET 

  • The raw mains water enters enclosed system and is forced at high pressure through a special extremely fine membrane
  • Salts and minerals are thereby completely removed from the water. The downstream dishwasher is thus supplied by perfectly clean water
  • For automatic rack-type and flight-type machines only
  • Supply of demineralized water to the standard break tank for final rinse. Not usable with separate DEMI rinse sections
  • If the total hardness of the mains water exceeds 10°dH, we recommend installing an upstream HYDROLINE PROTECT SD-H unit
  • Back-flow prevention not included
  • At a chlorine concentration above 0.05 mg/l a carbon filter on-site is required
  • Inclusive housing

Variants

Order number Description
RO-L

Reverse Osmosis for Flight Type and Rack Conveyor machines

PRODUCT FEATURES

  • High capacity / efficiency system
  • Continuous treatment system providing demineralised water for top-quality wash results
  • Prevents salt and limescale stains on dishes, glassware and cutlery in areas where carbon hardness is high
  • No need for manual polishing of glasses and cutlery
  • Protects machine against limescale deposits
  • Optimises the effectiveness of detergents - the dosing rate can be reduced
  • Unrivalled capacity at very low operating costs
  • Compact dimensions
  • Supplied with mixing valve, pre-filter and pressure restrictor dual check valve

Technical data

Power Supply 230 / 50 / 1
Total Loading - Standard 0.6 kW
Weight (gross / net) - / 42 kg
Maximum Efficiency Rate 75 %
Maximum Supply Hardness 25 °dH*
Maximum Conductivity Supply Water 2,000 µS/cm
Mineral Retention Rate 98 %
Supply Capacity 3,500 l/day l 280 l/hr
Supply Capacity Maximum 4.6 l/min

For machine protection the water hardness should not exceed 3°dH, if higher we recommend using a HOBART HYDROLINE water softener / treatment system.

top